Amana Dryer Belt Diagram & Details

The Amana dryer belt is a rubber belt that is used to connect the dryer drum to the drive motor in Amana dryers. It is an essential component of the dryer, as it allows the drum to rotate and tumble the clothes during the drying cycle. The belt is typically located behind the dryer drum and can be accessed by removing the dryer’s back panel.

The Amana Dryer Belt Diagram provided below should help you with fixes and maintenance of the belt.

Amana Dryer Belt Diagram

Amana Dryer belt diagram

Amana Dryer Belt & Related Components Explained

Drive Belt

The drive belt on your Amana dryer is a rubber belt that connects the motor to the dryer drum. It is responsible for transferring the rotational motion of the motor to the drum, allowing the drum to spin and tumble the clothes inside the dryer.

The drive belt is an essential component of the dryer, and if it becomes worn or damaged, it can cause the dryer to not function properly.

Idler Pulley

The idler pulley on an Amana dryer is a small wheel that helps to maintain tension on the dryer’s belt. This pulley is typically located near the dryer’s drum and is attached to the tension spring.

It is an important component of the dryer’s belt drive system, as it ensures that the belt remains tight and properly aligned, allowing the drum to spin smoothly and efficiently.

Drive Motor

The drive motor on the Amana dryer is the component that powers the drum and rotates it during the drying cycle. It is typically located at the back of the dryer and is connected to the drum via a belt or chain.

The drive motor is typically a small, electric motor that is controlled by the dryer’s control panel and is responsible for turning the drum at the appropriate speed and duration to dry the clothes.

Motor Pinion

The motor pinion is a small gear located on the dryer’s motor that is used to transmit power to the drum and other mechanical components of the dryer. It is typically made of metal and is attached to the motor shaft.

The motor pinion rotates along with the motor, transferring power to the drum and other components, which in turn allows the dryer to operate.

Idler Arm

The idler arm on an Amana dryer is a small metal arm that is attached to the dryer’s drive belt. Its function is to provide tension on the belt, allowing it to properly rotate the drum and tumble the clothes.

The idler arm is typically located near the front of the dryer and is connected to the drive motor and the belt. It is an important component in the functioning of the dryer, as it ensures that the belt is able to rotate the drum without slipping or coming loose.

Tension Spring

The tension spring on an Amana dryer is a small, coiled spring that is attached to the dryer drum and the door. Its purpose is to provide tension and support to the door so that it stays closed during the drying cycle. This tension helps to prevent the door from swinging open and allows the dryer to operate efficiently and safely.

Drum Glides

Drum glides are a type of component found in Amana dryers and other types of clothes dryers. They are located on the front and back of the drum, and their purpose is to provide a smooth, low-friction surface for the drum to rotate on.

This ensures that the clothes in the dryer do not get caught or snagged on the drum, and that the drum itself rotates smoothly and evenly. Drum glides are typically made of a durable, wear-resistant material such as plastic or rubber, and they may need to be replaced periodically due to wear and tear.

Blower

The blower on your Amana dryer is a component that circulates air within the dryer to evenly distribute heat and help dry clothes more efficiently.

It is typically located near the back of the dryer and is connected to the heating element and air vent. The blower is typically powered by an electric motor and is controlled by the dryer’s control panel.

Drum Rollers

The drum rollers on an Amana dryer are small, cylindrical wheels that support and rotate the drum inside the dryer. These rollers are typically made of a durable plastic or rubber material and are located on the front and back of the drum.

They help to evenly distribute the weight of the drum and clothing inside the dryer, ensuring smooth and consistent movement during the drying cycle. Over time, the drum rollers may wear out and need to be replaced to maintain the efficiency and performance of the dryer.

Lint Screen

The lint screen on the Amana dryer is a removable mesh filter located near the front of the dryer that catches lint and debris as the air flows through the dryer during the drying cycle. It is important to regularly clean the lint screen to prevent lint build-up and ensure efficient drying performance.

How to Maintain the Amana Dryer

To maintain the Amana Dryer, you can follow the steps below:

Clean the dryer

  • Remove lint and debris from the lint trap and venting system
  • Use a soft cloth to wipe down the interior of the dryer

Inspect the belt

  • Check for any signs of fraying, cracking, or looseness
  • Replace the belt if it is worn or damaged

Adjust the belt tension

  • Tighten the belt if it is too loose, or loosen it if it is too tight
  • Use a screwdriver or other tool to adjust the tension on the belt

Lubricate the belt and pulleys

  • Use a lubricant specifically designed for use on dryer belts and pulleys
  • Apply a thin layer of lubricant to the belt and pulleys to reduce friction and wear

Test the dryer

  • Run a test load of laundry to ensure the dryer is working properly and the belt is functioning correctly
  • Listen for any unusual noises or vibrations and make any necessary adjustments.