Samsung Bottom Freezer Ice Maker Diagram & Details

The Samsung Bottom Freezer Ice Maker is a built-in ice maker that is typically found in the bottom freezer compartment of Samsung refrigerators. It produces ice cubes that can be dispensed through the refrigerator door or dispensed directly into a glass or container.

Through the diagram below you can learn about the parts of the Ice Maker 

Samsung Bottom Freezer Ice Maker Diagram

samsung bottom freezer ice maker diagram

Samsung Bottom Freezer Ice Maker Parts Explained

Wiring Harness

The wiring harness on your Samsung ice maker is a set of wires and connectors that connect the ice maker’s electrical components to the power source and control panel.

This allows the ice maker to receive power and communicate with the control panel to properly operate and make ice. The wiring harness is typically located behind the ice maker and is connected to the main power source and control panel with connectors.

Ice Ejection Arm

The Ice Ejection Arm on the Samsung ice maker is a mechanism that helps to release ice from the ice maker into the ice bin. It typically consists of a metal arm that extends from the ice maker and has a paddle-like feature at the end, which pushes the ice out of the ice maker and into the ice bin. The arm is controlled by the ice maker’s internal mechanisms and operates automatically as needed.

Thermostat 

The thermostat on a Samsung ice maker is a component that regulates the temperature of the ice maker unit. It monitors the temperature inside the ice maker and adjusts the cooling mechanism accordingly to maintain a consistent temperature for ice production. This ensures that the ice cubes produced are of the desired size and quality.

Motor

The motor on a Samsung ice maker is typically a small electric motor that powers the auger or blade that shaves and dispenses the ice. It may also be used to power the mechanism that dispenses the ice into the ice bin or ice tray.

Module Assembly

The module assembly on a Samsung ice maker is a part of the ice maker unit that includes the control board, sensors, and other components that are responsible for controlling and monitoring the ice-making process. It helps to regulate the temperature, water flow, and ice production to ensure that the ice maker is operating efficiently and effectively.

Bail Wire (Shut-off Arm)

The shut-off arm on a Samsung ice maker is a mechanical device that automatically stops the production of ice when the ice bin is full. It is typically located near the top of the ice bin and is connected to a small lever or arm that moves up and down as the ice level changes. When the ice bin is full, the shut-off arm will move up and prevent ice from being produced until the ice level drops and the arm is able to move down again. This helps to prevent overfilling and potential damage to the ice maker.

Water Fill Solenoid

The water fill solenoid on a Samsung ice maker is a component that controls the flow of water into the ice maker. It is typically located near the bottom of the ice maker and is activated by the ice maker’s control board to open and close the water inlet valve, allowing water to flow into the ice maker when needed. The water-fill solenoid plays an important role in ensuring that the ice maker has a consistent supply of water to make ice.

Ice Stripper

The ice stripper on a Samsung ice maker is a component that helps to remove excess ice from the ice maker’s tray. It is typically a metal blade that scrapes the ice off the tray and into the ice bin, allowing the ice maker to continue producing more ice.

Ice Mold Assembly

The Ice Mold Assembly on the Samsung Ice Maker is a component that consists of the ice mold, which is the container that shapes the ice, and the ejector mechanism, which is responsible for releasing the ice cubes from the mold and into the ice bucket. It is typically located inside the ice-maker unit and is an essential part of the ice-making process.

Water Fill Tube

The water fill tube on the Samsung ice maker is a small tube that connects to the water supply and carries water into the ice maker to create ice. It is typically located on the back or side of the ice maker and is responsible for ensuring that the ice maker has a constant supply of water for ice production.

Water Inlet Valve

The water inlet valve on your Samsung ice maker is a component that controls the flow of water into the ice maker. It is typically located on the back of the ice maker and connects to the water supply line. The water inlet valve opens and closes to allow water to flow into the ice maker and fill the ice tray. It is an important component in the ice making process, as it ensures that the ice tray is properly filled with water in order to make ice.

How to Maintain the Samsung Bottom Freezer Ice Maker

Maintaining the ice maker would ensure that it provides the results with each. Follow these maintenance tips to make it happen. 

  • Regularly clean the ice maker by running a mixture of warm water and vinegar through it.
  • Use a soft cloth or brush to remove any debris or buildup from the ice maker’s components, such as the ice tray, ice chute, and ice bin.
  • Replace the water filter every six months to ensure the ice maker is using clean and fresh water.
  • Keep the freezer at the recommended temperature of 0 degrees Fahrenheit to ensure the ice maker can function properly.
  • Avoid overfilling the ice bin, as this can prevent the ice maker from functioning properly.
  • Check the ice maker for any signs of damage or malfunction and contact a professional for repair if necessary.